1、 Daily maintenance of belt conveyor

The belt conveyor conveys materials through friction transmission, and should be used correctly for daily maintenance during operation. The contents of daily maintenance are as follows:

1. Check before starting the belt conveyor

Check the tightness of all bolts of the belt conveyor, adjust the tightness of the belt, and the tightness depends on whether the belt slips on the roller.

2. Belt conveyor belt

(1) After using for a period of time, the belt of the belt conveyor will loosen, and the fastening screws or counterweights should be adjusted.

(2) The heart of the belt conveyor belt is exposed and should be repaired in time.

(3) When the core of the belt conveyor is corroded, cracked or corroded, the damaged part shall be scrapped.

(4) Be sure to check whether the belt joint of the belt conveyor is abnormal.

(5) Check whether the upper and lower rubber surfaces of the belt conveyor are worn and whether there is friction on the belt.

(6) When the belt of the belt conveyor is seriously damaged and needs to be replaced, it is usually possible to lay a longer belt by dragging the new belt with the old belt.

3. Brake of belt conveyor

(1) Belt conveyor brakes are easily contaminated by oil on the drive unit. In order not to affect the braking effect of the belt conveyor, clean the oil near the brake in time.

(2) When the brake pulley of the belt conveyor is broken and the worn thickness of the brake rim reaches 40% of the original thickness, it shall be scrapped.

4. Idler of belt conveyor

(1) If there are cracks on the welds of the idler of the belt conveyor, they should be repaired in time and can only be used after passing the test;

(2) The sealing layer of the idler of the belt conveyor is aged and cracked, which should be replaced in time.

(3) Lubricate the rolling bearing grease with No. 1 or No. 2 calcium sodium base. For example, if three shifts are produced continuously, they should be replaced every three months, and the period can be appropriately extended or shortened according to the situation.

Source: Conveyor manufacturer www.gdxingyong.com